Limit Access to Designated Areas
Limit admission to designated areas using HAI’s
Access Control products. When you swipe a card
or key tag, you can accomplish multiple functions
such as arming or disarming security and activating
a door strike to open a door.
All of products in the Access Control product
line, except the Access Control Keypad, require an Ethernet-enabled HAI home control system running
firmware version 3.0 or higher.
HAI Access Control has simplified wiring for residential or small
commercial use – everything between the
controller and the readers go over a single 4
conductor or Cat5 wire, including power.
HAI Access Control cards can also
be tied in to any home automation
functions that the HAI Omni or
Lumina family controller is capable
of including lighting, energy
management, surveillance, and audio.
|
|
|
|
Access Control Products |
|
|
|
Access Control Card Reader
|
HAI Part Number: 75A00-2
Manual
|
|
 |
125 KHz high security, digitally encrypted, 26-Bit
proximity card reader that connects to a serial port on
an HAI Home Control System. The reader has durable
and scratch resistant polycarbonate housing. Full epoxy
potting ensures successful operation even in harsh
environments.
The reader incorporates an input for a push to exit button
and an output for an electric door strike or magnetic lock .
It can be mounted to a door frame (mullion) or to any
flat wall surface. The two-color LEDs (green and red) and
piezo sounder on the reader can be customized to provide
individual feedback to the user.
Use either a standard credit card sized Access Control Card or
the convenient Access Control Key tag to access the system.
Each card/key is attached to a user code in
the HAI Omni or Lumina family controller
which can be managed with specific
privileges, based on time of day and day
of week, and access can be restricted to
specific readers.
Each swipe can perform as many actions as desired and
these results can be customized by time of day, arming
condition, or any other event the HAI home control system is
monitoring. Because each card or key tag is tied to a specific
user, all of the actions can also be customized for each
individual user.
Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher.
|
|
| |
|
Top of Page
|
Access Control Card Pack of 10
|
HAI Part Number: 78A00-1
|
|
|
125 KHz credit card size 1.7mm thick high security
proximity card with fully encrypted format stored on the
card. It is thin, flexible, and light enough to be carried in
a purse or wallet. It is preprogrammed at the factory with
a unique encryption code. It provides a read range up to
4 inches.
Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher.
|
|
| |
|
Top of Page
|
|
|
Access Control Key Tag Pack of 10
|
HAI Part Number: 78A00-2
|
|
|
A very small (only 4 grams) 125 KHz high security digitally
encrypted proximity key tag. It has a hole for a key ring or
chain. It is pre-programmed at the factory with a unique
encryption code. It is small and durable enough to fit on
a key ring. It provides a read range up to 2 inches.
Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher.
|
|
| |
|
Top of Page
|
|
|
One-Button VoIP Door Station with Camera
|
HAI Part Number: 913 7111 CE
Tech Sheet
|
|
 |
This product is made available through an HAI reselling partnership with 2N Telecommunications. 2N Helios VoIP video intercom door station for single-family residential installation.
Press the buton and it calls IP Touchscreens in the home, allowing homeowners to both speak with and see the guest. Connects to home's Ethernet network and is Power over Ethernet (PoE). Uses VoIP SIP Protocol. Features an integrated web server and provides streaming video. Water resistant. |
|
| |
|
Top of Page
|
|
|
This access control keypad is designed to interface with any HAI
Omni family or Lumina family home control system,
and it is both weatherproof and vandal resistant.
The piezoelectric buttons work simply by tapping the surface, and do not
require an actual physical movement. The
sleek keys of this keypad can be operated with a bare finger or a snow-covered
glove equally well.
The Access Control Keypad connects via the
serial port on an HAI home control
system.
|
|
| |
|
Top of Page
|
|
12 VDC Electric Door Strike
|
HAI Part Number: 79A00-1
|
|
|
When used with Access Control Reader (75A00-2), the
Electric Door Strike securely locks and unlocks a
door without the need of a key. It allows the door to be
locked when closed, but can be automatically unlocked
by the system, or manually unlocked with a key.
The 12 VDC Electric Door Strike is a Fail-Secure device, which means
the door unlocks when power is connected (i.e. the door
is locked when power fails).
Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher.
|
|
| |
|
Top of Page
|
|
Power Hub in Enclosure
|
HAI Part Number: 83A00-1
Manual
|
|
 |
General purpose 12VDC power supply with battery backup mounted in
enclosure. Designed to provide power to several HAI
products, including the HAI Access Control Readers with
electric or magnetic locks, Omni Consoles, OmniTouch
5.7 Touchscreens, and many other devices.
The HAI Power Hub provides battery backed power for
connected devices. It has convenient connections and
power terminals for a neat installation. It is designed to
eliminate unsightly transformers, power strips, external
power supplies, battery backup units, and complex wiring
normally associated with access control installations.
The HAI Power Hub has connections for up to 8 Access Control Readers with electric and magnetic locks.
|
|
| |
|
Top of Page
|
|
Power Hub for Structured Wiring Enclosures
|
HAI Part Number: 83A00-2
Manual
|
|
|
General purpose 12VDC power supply for structured
wiring enclosures. Designed to provide power to
several HAI products, including the HAI Access Control
Readers with electric or magnetic locks, Omni Consoles,
OmniTouch 5.7 Touchscreens, and many other devices.
The HAI Power Hub provides battery backed power for
connected devices. It has convenient connections and
power terminals for a neat installation. It is designed to
eliminate unsightly transformers, power strips, external
power supplies, battery backup units, and complex wiring
normally associated with access control installations.
The HAI Power Hub has connections for up to 8 Access Control Readers with electric and magnetic locks.
|
|
| |
