|
HAI Part Number: 35A00-3
Case of 12: 35A00-3CS
Requirements:
-
Requires a neutral (white) connection wire.
-
If you are using an HAI home control system with your switch
you must install a UPB™ PIM & cable (HAI Part Number 36A00-1).
-
If you are using the HAI Upstart Configuration software you must install an
UPB™ PIM & cable (HAI Part Number 36A00-1) and
a cable to connect your PIM to a computer (HAI Part Number 36A05-2).
Recommendation:
HAI recommends that every HAI Lighting Control (HLC) installation include a
Phase Coupler
(HAI Part Number 39A00-1).
Usage
The HAI UPB™ 600W Non-Dimming Switch is capable of
being set to a dimming mode (see Configuration Software below).
These 600W Non-Dimming switches are for loads like compact fluorescent and high efficiency lighting
fixtures that should not be dimmed.
HLC Products work as stand-alone or with a
Home Control System.
An HAI home control system has the ability to change your light settings by the
time of day, a set schedule, by the triggering of events (including motion), via a telephone call,
Touchscreen, Smartphone, or by a computer connected to the Internet.
To discover more about lighting control with an HAI home control system
click here.
About HLC
All HLC products are UL Listed and use
Generation II Universal Powerline Bus (UPB™)
– a digital communications standard for lighting and home control that
ensures superior reliability.
UPB™ has been extensively tested
and researched in residential environments and found to be 99.9 percent reliable.
UPB™ works over existing wires in a home and does not require new wiring.
Switch Diagram
 | 
2008 Product Guide
Update List
