HLC Tech Sheet (PDF)



HAI Lighting Control Brochure (PDF)

HAI UPB™ UPStart Configuration software

Learn About Home Automation (PDF)

2008 Product Guide

View Online

Download PDF (13 MB)

The 600 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts.  It comes with a default white paddle, connectors, and instructions.

The 600 Watt UPB™ Non-Dimming Switch is used for controlling loads up to 600 Watts.  It comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

The 1000 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 1000 Watts.  It comes with connectors and instructions.

While this switch comes in a default mode of dimming it may be set to non-dimming.

See the details page for this switch regarding matching colors with this switch with other switches in the HLC product line.

The 1500 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 1500 Watts.  It comes with connectors and instructions.

HAI sells wallplates for this switch. The white Wallplate is HAI Part Number 55A02-1, and the ivory Wallplate is HAI Part Number 55A02-2.

While this switch comes in a default mode of dimming it may be set to non-dimming.

The 2400 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 2400 Watts.  It comes with connectors and instructions.

HAI sells wallplates for this switch. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2.

While this switch comes in a default mode of dimming it may be set to non-dimming.

The 15A Relay UPB™ Switch is used for controlling heavier loads (up to 15 Amps) or motors, such as ceiling fans, that may hum when used with Dimming or Non-Dimming switches. It comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

The Auxiliary Switch is used in conjunction with HLC switches for multi-way lighting circuits.  It comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

A Scene Switch is also known as a Room Controller. It controls all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes.

Scene Switches have an integrated infrared sensor and its buttons may be activated by a remote control (HAI Part Number 38A14-1).

The default color for a Scene Switch is White. Scene Switch Color Change Kits (HAI Part Number 38A04-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

The buttons may be custom laser engraved with their scene names using HAI Part Number 38A06-2.

A House Status Switch (also known as a House Controller) acts as the master lighting control that shows the status for up to eight rooms. If any light is on in one of its rooms, the button for that room is illuminated. Pressing the House Status Switch button will turn all of the lights in that room on or off.

The default color for a House Status Switch is White. House Status Switch Color Change Kits (HAI Part Number 38A05-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

The buttons may be custom laser engraved with their room names using HAI Part Number 38A06-2.

The UPB™ Lamp Module controls lamps up to 300 watts.

The UPB™ Lamp Module may be used in stand-alone lighting control or be used in lighting control within a home control system.

The UPB™ Appliance Module controls loads up to 15 Amps, general purpose, 1/2 horsepower.

The UPB™ Appliance Module may be used in stand-alone lighting control or be used in lighting control within a home control system.

The Table Top Scene Switch Cradle is used to table mount the Scene Switch (38A00-1), House Status Switch (38A00-2), or Lumina Mode Switch (38A00-3). You may purchase it in either Black or White and either with or without an HAI Scene Switch.

The Table Top Scene Switch Cradle can be conveniently located throughout the home, including on a bedside nightstand, on the desk in a home office, or next to your favorite chair. It plugs directly into electrical outlet and has a cord length of 6 feet.

The Table Top Scene Switch Cradle may be used in stand-alone lighting control or be used in lighting control within a home control system.

A UPB™ Powerline Interface Module (PIM) will connect your lighting system to a UPB™ compatible home control system or to a computer, which can then control your UPB™ lights. It comes with a cable for connecting the PIM to a serial port on an HAI Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control system.

The UPB™ PIM to computer cable (HAI Part Number 36A05-2) is used to connect the PIM to a computer's standard DB-9 serial port for use with HAI UPB™ UPStart configuration software.

If your Omni LT home control system is using all of its serial ports, HAI offers the HLC Expansion Kit for Omni LT (HAI Part Number 36A10-1) to add another serial port for the PIM to use.

A Phase Coupler for 120/240V electrical systems increases the reliability of your HLC system.

HAI recommends the use of this part in every HLC installation.

Scene Switches have an integrated infrared sensor and its buttons may be activated by this remote control. This remote control allows the homeowner to activate any button on the room's scene switch or any button on up to three other scene switches in the house.

This remote comes in white.

HLC Load Control Module controls the power consumption of high wattage loads such as pool pumps and hot water heater.

• For indoor use only
  
• Input voltage / frequency: 120 VAC / 60 Hz
  
• Output: 30A @ 120 / 240 VAC, 1HP @ 120 VAC, 3 HP @ 240 VAC
  
• Connections: 10AWG, 16AWG flying leads
  
• Dimensions: 4.6" X 4.6" X 2.5"
  
• Uses Generation II UPB™ Powerline Carrier Technology, a reliable digital communications standard
  

Note that this product is also referenced in the Energy Management portion of the website.

The UPB™ PIM to computer cable is used to connect the UPB™ PIM (HAI Part Number 36A00-1) to a computer's standard DB-9 serial port for use with HAI UPB™ UPStart configuration software.

For the 600W Dimmer (HAI Part Number 35A00-1), 600W Non-Dimming Switch (HAI Part Number 35A00-3), 15A Relay Switch (HAI Part Number 40A00-1), and Auxiliary Switch (HAI Part Number 37A00-1).

Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.

For the Scene Switch (HAI Part Number 38A00-1).

Scene Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.

For the House Status Switch (HAI Part Number 38A00-2).

House Status Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.

Coupon & Instructions for custom laser engraved buttons for 6 button Scene Switch or 8 button House Status Switch. Mail in coupon, receive by mail.

HAI sells wallplates for the 1500W Switch. The white Wallplate is HAI Part Number 55A02-1, and the ivory Wallplate is HAI Part Number 55A02-2.

HAI sells wallplates for the 2400W Switch. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2.