Products -> Safety -> Surveillance

Indoor/Outdoor IP Camera

HAI Part Number: 68A11-1
Tech Sheet
Manual

• 1.3 Megapixels
• H.264 main profile codec for high resolution broadcast
• MJPEG real time streaming
• Simultaneous H.264 / MJPEG video stream (dual stream)
• 30 frames per second @ 720p
• Operating Temperatures: -4 to 122 F (-20 to 50 C)
• Built-in Web server and network interface allows viewing anywhere in the world
• Power over Ethernet (IEE 802.3af), so no power outlet required
• Lightweight & compact size
  

Indoor/Outdoor Day/Night Dome Camera
High Resolution

HAI Part Number: 68A01-1
Manual

• Scanning System 525 lines, interlaced
  
• High Resolution - 420 TV Lines (color)
  
• 1/3” Super HAD CCD Sensor
  
• 0 Lux under IR illumination
  
• 4” Polycarbonate Bubble
  
• Water-resistant IP66 Protection
  
• 3-Axis Gimbal
  
• 12VDC/24VAC Dual Voltage
  
• Flush Mount Housing with Surface Mount Plate
• Power supply required, but not included
  

Day/Night Color Bullet Camera

HAI Part Number: 68A02-2
Manual

• High Resolution - 550 TV Lines (color), 600 TV Lines (B/W)
  
• 1/3” CCD Sensor
  
• 3.8-9.5mm, DC Auto Iris
  
• Day/Night Functions with ICR
  
• 0.1 Lux (Color), 0.01 Lux (B/W), 0.002 Lux (DSS On)
  
• Separate Camera Control Board
  
• On-Screen Display Menu
  
• Service Monitor Output
  
• Aluminum Housing (Weatherproof)
  
• Aluminum Bracket (Wire Feed-Through)
  
• 36 IR LEDS
  
• 12VDC/24VAC Dual Voltage
  
• Power supply required, but not included
  

HAI Camera Server

HAI Part Number: 87A00-1

HAI Camera Server Tech Sheet
Manual
Quick Start Guide Using the IPAdminTool Software Utility

The HAI Camera Server converts up to 4 analog surveillance camera signals, including HAI’s Indoor Dome Camera (68A01-1) and Day/Night Bullet Camera (68A02-1), to IP video streams. These streams are viewed via the Camera Server's embedded web server or through its output for a camera monitor.

The Camera Server has PTZ and audio support. It supports a maximum of 640 x 480 resolution, and its output is in MJPEG format.

The HAI Camera Server may be installed stand-alone or with an HAI home control system.

Cameras may be viewed at home or over the Internet using a Web browser or Snap-Link (1120). Cameras maybe viewed on an HAI in-wall OmniTouch 5.7e Touchscreen (53A00-2), using HAI Automation Studio (1126).

Cameras may also be viewed on a handheld mobile device, such as a PDA, Smartphone, or other device running Windows® Mobile operating system, using HAI Snap-Link Mobile (1120M) or HAI WL3 (1112). BlackBerry™ phones require HAI WL3 to view cameras. iPhone™ users may view cameras without any additional software.

The Camera Server is designed so that it may be wall mounted or used with an optional Mounting Plate (see below).