Products -> Energy Mgt -> Lighting Control ->
600W UPB™ Dimmer / Non-Dimming Switches

HAI Part Numbers: Click here

Control 600W Lighting Loads

The HAI UPB™ 600W Dimmer Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. The HAI UPB™ 600W Non-Dimming Switch is capable of controlling loads, such as fluorescent lights, that do not belong on a dimming switch.

If you wish to be able to dim your lighting load, select the 600W Dimmer model; otherwise, select the 600W Non-Dimming model. Note that the 600W Dimming switch is capable of being set to a 600W Non-Dimming switch and vice-versa (see Configuration Software below).

Switch Operation

Both the 600W switches have a Decora-style rocker switch.

The 600W Dimmer may be used to control the lighting load as follows:

Rocker Event	Top Rocker	Bottom Rocker
Single-Tap	Brightens the light towards fully on	Fades the light to fully off
Double-Tap	Snaps the light to fully on	Snaps the light to fully off
Hold	Starts brightening the light towards fully on	Starts dimming the light towards fully off
Release	Stops brightening the light	Stops dimming the light

The 600W Non-Dimming switch may be used to control the lighting load as follows:

Rocker Event	Top Rocker	Bottom Rocker
Single-Tap	Snaps the light to fully on	Snaps the light to fully off

Switch LED

The 600W switches come equipped with a multi-color LED indicator that may be set to off, blue, red, or magenta. The default settings are as follows:

Switch is off - LED is blue
Switch is on - LED is off

You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).

Colors

The 600W switches come with a default white paddle, connectors, and instructions.

Switch Color Change Kits, sold in case lots of 12 only, are available in White, Ivory, Almond, Light Almond, Brown, Grey, and Black.

Wallplate

No Wallplate is included when you purchase a 600W switch. With the exception of the 1500W and 2400W models, HAI Lighting Control (HLC) switches accommodate standard Decora-style Wallplates. Mix and match to easily add a personalized touch to any room.

About HAI Lighting Control (HLC)

HLC Products work as stand-alone or with a Home Control System. An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet. To discover more about lighting control with an HAI home control system click here.

All HLC products are UL Listed and use Generation III Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

Easier to Install

HAI 600W switches have been engineered with less depth than competitor products; consequently, HAI 600W switches are easier to install.

Configuration Software

When used with an Omni family or Lumina family home control system HLC products automatically configure themselves, and outside software is not required.

HAI offers HAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to HAI's default setup. It will allow you to change the mode of a Dimmer Switch to be Non-Dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.

Requirements / Recommendations

• 600W Switches require a neutral (white) connection wire.
  
  
• If you are using an HAI home control system with HLC switches, you must install a UPB™ PIM.
  
  
• HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler.
  
  
• To use the HAI Upstart Configuration software you must install a UPB™ PIM and use a UPB™ PIM to computer cable to connect it to a computer.
  
  

De-rating

In three-gang installations these switches must be de-rated to 500W.

Description	Load
Device Maximum Load	600W
Next to One Dimmer	600W
Next to Two Dimmers	500W

HAI Part Numbers

Image	HAI Part Number	Description
	35A00-1 35A00-1CS (Case of 12)	600W UPB™ Dimmer Switch The 600 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts.  It comes with a default white paddle, connectors, and instructions. These switches may be changed from a Dimmer mode to a Non-Dimming mode. Switch Color Change Kits, sold in case lots of 12 only, are available in White, Ivory, Almond, Light Almond, Brown, Grey, and Black.
	35A00-3 35A00-3CS (Case of 12)	600W UPB™ Non-Dimming Switch The 600 Watt UPB™ Non-Dimming Switch is used for controlling non-dimming lighting loads, such as fluorescent lights, up to 600 Watts.  It comes with a default white paddle, connectors, and instructions. These switches may be changed from a Non-Dimming mode to a Dimmer mode. Switch Color Change Kits, sold in case lots of 12 only, are available in White, Ivory, Almond, Light Almond, Brown, Grey, and Black.
	35A14-ALCS (Almond) 35A14-LTACS (Light Almond) 35A14-BLCS (Black) 35A14-BRCS (Brown) 35A14-GRCS (Grey) 35A14-IVCS (Ivory) 35A14-WHCS (White)	Switch Color Change Kit Paddle, bezel assembly for the 35A00, 37A00, and 40A00 series switches. Order Kit in desired color. Sold in Case Lots of 12 only.
	36A00-1 36A00-1CS (Case of 12)	UPB™ Powerline Interface Module (PIM) This PIM connects the UPB™ lighting system to an automation system or computer, which can then control the lights. The PIM makes the lighting system accessible through the home computer or from a remote location over the Internet. Comes with a cable for connecting the PIM to a serial port on an HAI home control system.
	36A05-2	UPB™ PIM to computer cable The UPB™ PIM to computer cable is used to connect the PIM to a computer's standard DB-9 serial port for use with HAI UPB™ UPStart configuration software.
	39A00-1 39A00-1CS (Case of 12)	Phase Coupler HLC is for single phase 120/240 VAC, 60 Hz systems. The HLC Phase Coupler mounts by the circuit breaker box and is used to connect the signal from L1 to L2 within the circuit breaker box. Although HLC is extremely robust and less susceptible to powerline conditions, HAI recommends the use of a Phase Coupler in every HLC installation. The LED on the Phase Coupler shows that it is working.